My Blog

Posts for tag: x-rays

AdvancedEquipmentandSafePracticesEnsureX-RaySafetyforChildren

When it comes to our children’s safety, there isn’t much nowadays that isn’t under scrutiny. Whether food, clothing, toys and more, we ask the same question: can it be harmful to children?

That also includes tried and true healthcare practices. One in particular, the routine x-ray, has been an integral part of dental care for nearly a century. As a means for detecting tooth decay much earlier than by sight, it has without a doubt helped save billions of teeth.

But is it safe for children? The reason to ask is because x-rays are an invisible form of electromagnetic radiation that can penetrate human tissue. As with other forms of radiation, elevated or frequent exposure to x-rays could damage tissue and increase the future risk of cancer.

But while there is potential for harm, dentists take great care to never expose patients, especially children, to that level or frequency of radiation. They incorporate a number of safeguards based on a principle followed by all healthcare professionals in regard to x-rays called ALARA, an acronym for “as low as reasonably achievable.” This means dentists and physicians use as low an exposure of x-ray energy as is needed to achieve a reasonable beneficial outcome. In dentistry, that’s identifying and treating tooth decay.

X-ray equipment advances are a good example of ALARA in action. Digital imaging, which has largely replaced film, requires less x-ray radiation for the same results than its older counterpart. Camera equipment has also become more efficient, with modern units containing lower settings for children to ensure the proper amount of exposure.

Dentists are also careful how often they take x-ray images with their patients, only doing so when absolutely necessary. As a result, dental patients by and large experience lower dosages of x-ray radiation in a year than they receive from natural radiation background sources found every day in the environment.

Dentists are committed to using x-ray technology in as safe and beneficial a way as possible. Still, if you have concerns please feel free to discuss it further with your dental provider. Both of you have the same goal—that your children have both healthy mouths and healthy bodies for the rest of their lives.

If you would like more information on x-ray safety for children, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “X-Ray Safety for Children.”

TheSimpleBitewingX-RayisaGameChangerforMaintainingDentalHealth

X-rays are such a routine part of dental care that it's easy to overlook how much this technology has revolutionized detecting and treating tooth decay. It's safe to say x-rays have helped save hundreds of millions of teeth over the last hundred years.

Thanks to its unique properties these invisible electro-magnetic waves give us precise images of the interior structure of teeth and gums. It's so precise that we can clearly detect even a small spot of softened, decayed tooth structure on an exposed x-ray film, often before it becomes visible to the naked eye. As a result, we can begin treating the decay earlier, minimizing the damage and increasing the chances for preserving the tooth.

There are a variety of ways we can utilize x-ray technology in diagnosing dental problems. The one, though, that's used the most is called the bitewing. The name comes from wing-like tabs extending out from a thin frame holding a segment of unexposed film. A technician places the frame inside the patient's mouth with the film on the tongue side of the teeth, and has them bite down on the tabs to hold the frame still. They then aim a camera at the patient's outer cheek, which then emits a very short burst of x-ray energy to expose the film.

Bitewings are popular because they give a full view of the back and side teeth, where decay is often hard to detect, with very little radiation exposure to the patient. And as x-ray technology has progressed over the years with digital processing and more efficient equipment, we can acquire sharper images with even less exposure. We've also developed standard protocols for when and how often we perform x-rays, so that we're getting the most diagnostic benefit for the least amount of exposure time.

Those few minutes getting an x-ray may seem routine, but the benefits to your dental health are truly amazing. The bitewing and other forms of x-rays play a huge role in helping us keep your teeth as healthy as they possibly can.

If you would like more information on x-ray diagnostics, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Bitewing X-Rays.”

By Forest Hills Dental
March 23, 2017
Category: Oral Health
Tags: pediatric dentistry   x-rays  
SafetyisaPriorityWhenImagingChildrensTeethwithX-Rays

X-ray imaging is a routine part of a child's dental care — and it undeniably makes a difference in preventing and treating dental disease. It's so routine, we can easily forget they're being exposed to an invisible form of electromagnetic radiation.  And just like other sources of radiation, too much x-ray exposure could increase the risk of cancer.

But while it's possible for your child to be over-exposed to x-rays, it's highly unlikely. That's because healthcare professionals like dentists adhere to a standard known as ALARA when considering and administering x-rays. ALARA is an acronym for “as low as reasonably achievable.” In other words, we only want to expose a patient to the lowest and safest levels of x-ray dosage and frequency that will achieve the most benefit.

To achieve that standard, professional dental organizations advocate the use of x-rays only after a clinical examination of the patient, as well as a thorough review of their medical history for any usage of x-rays for other conditions. If x-rays are warranted, we then take further precautions to protect the patient and staff, and only use the type of x-ray application that's absolutely necessary. For most children that will be a set of two or four bitewing radiographs, which are quite effective for detecting decay in back teeth.

This dosage of radiation in a session of bitewing radiographs is roughly a fifth of the background radiation in the environment a child may be exposed to every day. By spacing these sessions at least six months apart, we're able to achieve a high level of decay detection at a safe and reasonable amount of x-ray exposure.

On top of that, the digital advances in x-ray imaging have reduced the amount of radiation energy needed to achieve the same results as we once did with film. These lower exposure levels and the ALARA standard helps ensure your child's exposure to x-rays will be well within safe limits.

If you would like more information on the use of x-rays with children, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “X-Ray Safety for Children.”

PrudentUseofX-RaysinChildrenProvidesthemostBenefitattheLowestRisk

It’s important for your child’s current and future health that we watch out for tooth decay. Taking x-rays is a critical part of staying one step ahead of this common disease.

But while x-ray imaging is commonplace, we can’t forget it’s still a form of radiation that could be potentially harmful, especially for a child whose tissues are rapidly developing. We must, therefore, carefully weigh the potential benefits against risk.

This concern has given birth to an important principle in the use of x-rays known as ALARA, an acronym for “As Low As Reasonably Achievable.” In basic terms, we want to use the lowest amount of x-ray energy for the shortest period of time to gain the most effectiveness in diagnosing tooth decay and other conditions.

A good example of this principle is a common type of radiograph known as a bitewing. The exposable x-ray film is attached to a plastic devise that looks like a wing; the patient bites down on it to hold it in place while the x-ray exposure takes place. Depending on the number of teeth in a child’s mouth, an appointment usually involves 2 to 4 films, and children are typically spaced at six months apart. Frequency of x-rays depends on your child’s tooth decay risk: lower risk, less need for frequent intervals.

Each bitewing exposes the child to 2 microsieverts, the standard unit for radiation measurement. This amount of radiation is relatively low: by contrast, we’re all exposed to 10 microsieverts of background radiation (natural radiation occurring in the environment) every day or 3,600 microsieverts annually. Even two appointments of four bitewings each year is a fraction of a percent of the background radiation we’re exposed to in the same year.

This conservative use of x-rays is well within safe parameters for children. As x-ray technology continues to advance (as with the development of digital imaging) we anticipate the exposure rate to diminish even more. Prudently used, x-rays remain one of our best tools for ensuring your child’s teeth are healthy and developing normally.

If you would like more information on the use of x-rays with children, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “X-Ray Safety for Children.”

By Forest Hills Dental
November 11, 2015
Category: Dental Procedures
Tags: x-rays  
BitewingX-RaysProvideEarlyDetectionofToothDecayinBackTeeth

One of the most widely used forms of dental imaging is the bitewing x-ray. So called because of the shape of the device that holds the exposable film a patient clenches between their back teeth, the bitewing x-ray is an effective means for detecting the earliest stages of tooth decay.

These early signs are small lesions on a tooth surface caused by mineral loss in the enamel. While we can identify them on front teeth through visual examination or bright lighting, they’re nearly impossible to see on the biting surfaces of back teeth. The bitewing x-ray solves this problem.

During the procedure, a narrow beam of x-rays is directed at the back teeth area. Since X-rays can transmit through solid matter, they pass through the teeth and gums to expose the film attached to the bitewing assembly.

X-rays pass through matter at different rates depending on the density of the tissue — a slower rate for harder tissues like teeth and bone and a faster rate for soft tissues like the gums. As a result, x-rays through teeth expose less of the film and appear as a lighter image than the gums. This difference is so precise even a tooth’s softer dentin appears slighter darker than its harder outer enamel.

This precision helps us identify decay lesions. Because the lesions on the enamel are less dense than the normal enamel, they’ll appear as dark spots. By detecting them at this stage we have a better chance for reversing the effects of decay or at least minimizing damage that’s already occurred.

Because x-rays emit radiation, there’s a natural concern about over-exposure and we go to great lengths to reduce it. Children may undergo a bitewing x-ray twice a year for developing teeth, while adults with healthy teeth are typically x-rayed just once a year. Advances in digital film and other technology have also helped lower the exposure rate.

Today’s standard 4-film bitewing x-ray produces about four days worth of what we receive on average from normal background radiation, so the health risk is quite negligible. The benefit, on the other hand, is much greater — the early detection of tooth decay could ultimately save a tooth.

If you would like more information on the use of bitewing x-rays in dental care, please contact us or schedule an appointment for a consultation.



Office Hours
Monday:10:00 AM - 7:00 PM
Tuesday:10:00 AM - 7:00 PM
Wednesday:9:00 AM - 6:00 PM
Thursday:9:00 AM - 7:00 PM
Friday:9:00 AM - 5:00 PM
Saturday:8:00 AM - 1:00 PM
Sunday:Closed

Contact Us